View Single Post
Old October 29th, 2008   #1 (permalink)
ftagoodcablebad
VIP Access Member
 

Join Date: Nov 2007
Posts: 8
Credits: 352.90
Thanks: 2
Thanked 12 Times in 1 Post
Digiwave Hi-Def PCi card

Has anyone used one of these in a PC? Unless I'm misunderstanding the spec it supports QPSK and 8PSK mod out of the box, does Diseq and Usals, and provides PVR and EPG functions as well. Any current BIN support or just too new? Looks like an alternative to the venerable SV8000/8PSK - if it works.

Also check out the monster five lnb all-in-one bracket here:

Digiwave Satellite Wholesale Distributor - MPEG2 Digital Receivers, LNBFs, Digital Equipment, Stab Motor, Moteck Motor, Switch, CCTV Camera - Wholesale Satellite Distributor - Wholesale only

Anyone tried this and got it to work?


DVB-S2 Hi-Definition Satellite PCI Card



  DIGIWAVE DTV DVB-S2 PCI DGP-202G                             
DVB-S2 is an improved and updated specification to replace the DVB-S standard, The main use for this new standard is the distribution of HDTV, while the original standard was mainly applied to SDTV services. The development of DVB-S2 coincided with the introduction of HDTV and H.264 (MPEG-4) video codecs ,yes ,DIGIWAVE DTV DVB-S2 PCI card fascia give you watching best TV .
Key Features:  
  • Support DVB-S Protocol (EN 300 744) &Support DVB-S2 Protocol
  • Support DVB-Data Protocol (EN 301 192)
  • Digital Satellite TV and Radio Program Receiving
  • Support HDTV (MPEG2&MPEG4/H.264) Receiving
  • Real Time Digital Video Recording (DVR) and Scheduling Recording
  • Time-Shifting
  • Electronic Program Guide (EPG)
  • Still Frame Capture
  • Multi Free Channel Preview
  • Subtitle
  • Satellite / Transponder Auto Scan
  • IP PID scanning, IP data broadcasting in LAN
  • MPEG2 Video broadcasting in LAN, Generate IP data broadcasting task automatically
  • IP MPEG4 media playing, IP MPEG4 media recording
  • Favorite List
  • Full Screen Display
  • Multi language Switch
  • MPEG-II Software Decoding
  • Software Upgradeable
  • DiSEqC 1.2 / USALS Support
  • IR Remote Controller Available
 
Specification:
 TUNER
  • Input terminal: F-type 75 Ohm
  • Receiving frequency: 950~2150MHz tuning range
  • Input level: -75~10dbm
  • Carrier Capture Range : ±5MHz
  • Amboent Temperature : 0°C to +70 °C
  • Support MCPC and SCPC
 Demodulator & FEC
  • Symbol rate: 2~45Msps
  • QPSK:1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10         8PSK:3/5, 2/3, 3/4, 5/6, 8/9, 9/10
 LNB & Switch control
  • LNB supply voltage:13 or 18V With Short Circuit Protection
  • DiSEqC:1.2
  • Support Data Burst & Tone Burst
  • Antenna and LNB control: 22KHz tone
  • Max. LNB supply current: 450mA
 PCI interface
  • PCI bus: PCI 2.1 compliant
  • Host bus burst rate: 132MB/s
  • Host bus width: 32 bit
 De-Multiplexing
  • Max. No. Section filtering:64 PIDs
  • Engine: software
  • Streams capture: PES and TS
 A/V Format
  • Video format: MPEG-II Main Profile& Main Level
  • Audio format: MPEG-II Audio layer I & II
 Options
  • IR Remote Controller
  System Requirements Retail package 
  • Microsoft Windows 2000/XP32/64 Vista32/64
  • P3 500MHz CPU or above for SDTV
  • P4 2.0GHz CPU or above for HDTV
  • 128M RAM for SDTV / 256M RAM for HDTV
  • VGA Card with at the least 16MB Memory
  • Microsoft Direct X 8.1 or above
  • Digital Satellite Dish & LNB
  • Digiwave TV DVB-S2 PCI card
  • Remote control
  • 2XAAA Batteries
  • IR Receiver
  • Installation Manual
  • Software CD


Created on 2008-08-14 09:37:26 by digiwave
Updated on 2008-09-02 10:04:24 by digiwave
ftagoodcablebad is offline   Reply With Quote