Quote:
Originally Posted by grasshopper
Do the following steps:
1. Plug turn on the STB (the STB need to be on so your PC can detect the USB)
2. plug one end into Device (on stb) the other to your PC
3. install the driver (Windows will auto detect and ask you to install the neccessay driver for the device)
4. Turn off your STB (using back switch, you need to turn off the unit before running USB LOADER or TFTPServ)
5. on your pc, open USB Loader or TFTPServ, open the necessary file you wanted (YOU NEED TO TURN OFF YOUR STB FROM THE BACK BEFORE OPEN USB LOADER)
6. Then turn on your stb (using back switch)
the download should take no more than 15 sec, but leave the STB alone untill it completely reboot itself.
Troubleshoot
Numerous users have report that they have problem when install the driver on their Laptop.
Symtom: in the middle of the driver installation, the laptop screen black out and doesn't response, give the blue screen of death or automatically restart and the driver installation never complete.
this is cause by the USB controller on the laptop, mostly Toshiba Model. Dell also
Solution: Instead of connect the PVR directly to the laptop, put an USB hub in between, so the configuration will be
Laptop USB PORT >>>> USB HUB >>> USB on Sonicview PVR.
Hope this help guys
|
when i load 224 into my sonic1000 it takes more then 15seconds ,more like 1 minute, but when its done and it says to not turn of until reboot ,
i click ok an wait and the recever shows the letter n , it stays that way,does that mean its rebooted?
i then load my recever and do a sat scan i have good signal but only channels i get are the free ones
im on sat 110