ABA DSS - Free to Air Satellite TV Community - View Single Post

**bigevil69** · November 18th, 2008

1) Download and unzip both the ( COOLSATxx00_FAC_Vo1 cuurent) and NorW latest release

2) Connect your receiver to your computer using your RS232 cable.

3) Open your Coolsat 7000 Loader click the file button and load your Coolsat_xx00_Fac_Vo current into your loader

4) Put your mouse over the download button and as soon as you turn the Back power switch on your receiver ON click the download button
If your to slow it will NOT load and you must Repeat this step !

5)When your receiver reboots itself Or you see this ---- turn off the back switch and reconnect it to your TV then click Menu on your remote and then go to Installation screen and select SYSTEM RECOVERY and click YES to (System restore to Factory Default) when the factory reset is finished set the Language of choice and then set your time zone. After setting the time zone the receiver will ask if you want to Auto detect your satellites and switch settings. Say Yes at this time !

6. In most cases your coolsat will detect the correct settings and download the channels for you. If it doesnt you will have to manually enter your sat settings and scan.

just skip the factroy file pqrt and go straight to the bin

November 18th, 2008	#8 (permalink)
bigevil69 Moderator Join Date: Aug 2006 Posts: 14,640 Credits: 16,025.97 Thanks: 2,241 Thanked 12,837 Times in 4,838 Posts	Re: Trying to load bin via R232 1) Download and unzip both the ( COOLSATxx00_FAC_Vo1 cuurent) and NorW latest release 2) Connect your receiver to your computer using your RS232 cable. 3) Open your Coolsat 7000 Loader click the file button and load your Coolsat_xx00_Fac_Vo current into your loader 4) Put your mouse over the download button and as soon as you turn the Back power switch on your receiver ON click the download button If your to slow it will NOT load and you must Repeat this step ! 5)When your receiver reboots itself Or you see this ---- turn off the back switch and reconnect it to your TV then click Menu on your remote and then go to Installation screen and select SYSTEM RECOVERY and click YES to (System restore to Factory Default) when the factory reset is finished set the Language of choice and then set your time zone. After setting the time zone the receiver will ask if you want to Auto detect your satellites and switch settings. Say Yes at this time ! 6. In most cases your coolsat will detect the correct settings and download the channels for you. If it doesnt you will have to manually enter your sat settings and scan. just skip the factroy file pqrt and go straight to the bin