ABA DSS - Free to Air Satellite TV Community - View Single Post

tafelice · November 19th, 2008

be sure to do the pc to cable test that is in a sticky in the faq's. It is real clear. It will tell you if you are good from the pc to the business end of the cable you are about to put in the receiver.
After you do this test. It doesn't take long. Then when you are ready with the loader. The STB should NOT be connected to the TV. Have the mouse hovering over the DOWNLOAD key on the loader. With one finger on the toggle and one on the mouse, toggle/click then a 1/2 of a New York second beat then mouse/click. You should be downloading.
Do that pc port and cable test. you'll have confidence when you get to the loader or you'll know why it screwed up.
good luck.

November 19th, 2008	#16 (permalink)
tafelice Knows FTA Join Date: Aug 2006 Location: Middle Tennessee Posts: 154 Credits: 97.40 Thanks: 51 Thanked 23 Times in 22 Posts	Re: Trying to load bin via R232 be sure to do the pc to cable test that is in a sticky in the faq's. It is real clear. It will tell you if you are good from the pc to the business end of the cable you are about to put in the receiver. After you do this test. It doesn't take long. Then when you are ready with the loader. The STB should NOT be connected to the TV. Have the mouse hovering over the DOWNLOAD key on the loader. With one finger on the toggle and one on the mouse, toggle/click then a 1/2 of a New York second beat then mouse/click. You should be downloading. Do that pc port and cable test. you'll have confidence when you get to the loader or you'll know why it screwed up. good luck.