ABA DSS - Free to Air Satellite TV Community - View Single Post - Losing Signal and Quality in scan help!!!

**jrelliott1** · December 19th, 2008

Just started over formated stick redownloaded factory file and new bin on stick, loaded factory and hard booted then new bin hard booted. Again can't get 12224 or 12239 on 119 but 12282 and it showed 119 in upper corner start scan and get about 40 channels the signal and quality go to zero scan fails. So tried 110 set as the last thread 12224 works started scan got around 70 channels and it failed lost sig and quality. Problem is all 3 new units do the exact same thing.

December 19th, 2008	#6 (permalink)
jrelliott1 VIP Access Member Join Date: Aug 2008 Posts: 14 Credits: 511.40 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Losing Signal and Quality in scan help!!! Just started over formated stick redownloaded factory file and new bin on stick, loaded factory and hard booted then new bin hard booted. Again can't get 12224 or 12239 on 119 but 12282 and it showed 119 in upper corner start scan and get about 40 channels the signal and quality go to zero scan fails. So tried 110 set as the last thread 12224 works started scan got around 70 channels and it failed lost sig and quality. Problem is all 3 new units do the exact same thing.