January 2nd, 2009
|
#6 (permalink)
|
|
Veteran Abadss Member
Join Date: Jul 2007
Location: Somewhere in the vicinity of ZZ9 Plural Z Alpha
Posts: 1,907
Credits: 4,966.15
Thanks: 2,478
Thanked 3,334 Times in 798 Posts
|
Re: loop out to 2nd receiver
Quote:
Originally Posted by creativegenius
In short yes, but NO, ok well, kind of 
Assuming you have two LNB's feeding the nfusion i.e., 110 and 119, the signal from either 110 or 119 is then routed via 'loop out' to the input of your second receiver. The second receiver is dependant upon the port setting of LNB being feed at that time on the first receiver as switches can't be placed in line with the loop out signal.
So, if you are watching 110 on the nfusion, on Port 2, your second receiver can NOT be receiving signals from 119 or port 1 (this is impossible).
The loop out feature only lets you power one stb at a time. So the CW unit will be turned off, in order for this to work. If you power up the CW unit, while connected via loop out, the CW unit will only display the opposite polarity channels i.e., nfusion on a horizontal controlled channel, CW will display only vertically controlled channels. Switch the nfusion to a vertical channel, CW gets horizontals.
Creative Genius |
ok so If I have the nFusion off(1st in line) then the cw will work with all channels?
__________________
Testing.,., Testing.,., is this thing on?
|
|
|