Quote:
Originally Posted by mandydish
that's correct,you don't need any switches
|
To take full advantage of the SV-360 Elite as a dual tuner receiver, and beeing able to watch any channel, while recordording any other channel, at the same time, it would be best to feed both of its tuner inputs.
If your dish has a
DishPro Plus LNB stamped with the
dpPLUS symbol, you can use a single cable run from the dish hooked to a
DPP Separator, just behind the receiver. The DPP Separator (can be get for less than $5) should be hooked to the receiver, with 2 short (1-2 feet) RG6 cables, to the tuner inputs.
For any other LNBs including
DishPro LNB, two cable runs, from the dish to the receiver inputs, woud be required.