ABA DSS - Free to Air Satellite TV Community - View Single Post - please help, when trying to load new bin, process bar wont move

edisoname · March 1st, 2009

update:

Got the wrong cable, if anyone have the same problem, no matter what the sales tells you, go for the $30 -- $40 one
make sure always ask for "DATA TRASFER" Cable

cheaper cable just dont work, also some null calble has only three wires in it.
and othe 9pin or 25pin to 9pin has different wiring designs.

--------------------------------
ORIGINAL:
Im new to STB, its my 1st time tying to load bin, but not the box's first time.
Problem, process bar wont go on the loader.

I tried every port on the loader(both v1.06 and 1.07)
I used three different cpmputers
I used 2 null cables(one is printer comm port to 9pin null,
the other is USB serial + femal adapter)
I tried both "boot" & "stand by" mode
I tried to fac default the setting and disable/enable auto roll

nomatter what, the process bar wont go

please help me !

March 1st, 2009	#1 (permalink)
edisoname FTA Newbie Join Date: Mar 2009 Posts: 5 Credits: 7.00 Thanks: 0 Thanked 0 Times in 0 Posts	please help, when trying to load new bin, process bar wont move update: Got the wrong cable, if anyone have the same problem, no matter what the sales tells you, go for the $30 -- $40 one make sure always ask for "DATA TRASFER" Cable cheaper cable just dont work, also some null calble has only three wires in it. and othe 9pin or 25pin to 9pin has different wiring designs. -------------------------------- ORIGINAL: Im new to STB, its my 1st time tying to load bin, but not the box's first time. Problem, process bar wont go on the loader. I tried every port on the loader(both v1.06 and 1.07) I used three different cpmputers I used 2 null cables(one is printer comm port to 9pin null, the other is USB serial + femal adapter) I tried both "boot" & "stand by" mode I tried to fac default the setting and disable/enable auto roll nomatter what, the process bar wont go please help me ! Last edited by edisoname; March 2nd, 2009 at 03:51 PM..