ABA DSS - Free to Air Satellite TV Community - View Single Post

Newfoundland420 · April 5th, 2009

I currently have a CW 600s premium and am having trouble aiming the satalite to get a good quality and signal. the antenna settings I have set are as follows:

satellite name: 41Nimiq 1 (91W)
Transponder: 10964/v/19850/3/4
LNB freq: 11250
LNB type OCS-DP
22khz: off
Diesqc number: LNB3
legacy SW: off
no motorized system

I also tried various othersettings that coincide with the Echostar 6,8 110s that was listed in the step by step setup guide but was unable to find any signal at all. Im just wondering if these settings i have are correct? any tips on how aim my satalite so I can recive a signal. I have been simply systematically scanning the sky to pick one up without luck. some assistance would be much appreatiated.

April 5th, 2009	#1 (permalink)
Newfoundland420 FTA Newbie Join Date: Apr 2009 Posts: 1 Credits: 4.60 Thanks: 0 Thanked 0 Times in 0 Posts	Help in aiming dish I currently have a CW 600s premium and am having trouble aiming the satalite to get a good quality and signal. the antenna settings I have set are as follows: satellite name: 41Nimiq 1 (91W) Transponder: 10964/v/19850/3/4 LNB freq: 11250 LNB type OCS-DP 22khz: off Diesqc number: LNB3 legacy SW: off no motorized system I also tried various othersettings that coincide with the Echostar 6,8 110s that was listed in the step by step setup guide but was unable to find any signal at all. Im just wondering if these settings i have are correct? any tips on how aim my satalite so I can recive a signal. I have been simply systematically scanning the sky to pick one up without luck. some assistance would be much appreatiated.