ABA DSS - Free to Air Satellite TV Community - View Single Post

**grasshopper** · December 10th, 2006

1. First do a Factory Reset !! [Menu-System Settings-Database Reset-Factory Set]
2. Load Factory Flash !
3. Load the 137 bin Or the Latest bin
4. Do another Factory Reset !
5. Setup your dish settings & motor settings
6. Setup your options [Renumbering Local Channels is a new option]
7. Auto Scan sats. start with 119 (turning off network search will speed up 110 scan)
8. Set Time Settings and Channel Locks, Exit and Watch TV

**NOTE** Remember to always turn your coolsat off by the switch on the back of the unit before you disconnect or connect the coax cable or you may damage the stb.

December 10th, 2006	#1 (permalink)
grasshopper Super Moderator Join Date: Apr 2005 Location: Far Far Away Posts: 7,447 Thanks: 468 Thanked 16,032 Times in 2,501 Posts Rep Power: 129	How to Properly Load NorW Bins 1. First do a Factory Reset !! [Menu-System Settings-Database Reset-Factory Set] 2. Load Factory Flash ! 3. Load the 137 bin Or the Latest bin 4. Do another Factory Reset ! 5. Setup your dish settings & motor settings 6. Setup your options [Renumbering Local Channels is a new option] 7. Auto Scan sats. start with 119 (turning off network search will speed up 110 scan) 8. Set Time Settings and Channel Locks, Exit and Watch TV NOTE Remember to always turn your coolsat off by the switch on the back of the unit before you disconnect or connect the coax cable or you may damage the stb. Last edited by grasshopper; January 14th, 2007 at 04:55 AM.