Hi Abadss,
I had everything working until a day or two ago when all the channels went scrambled. I have bin 2.26 loaded. I remember after i loaded that bin, everything was working.
These are the things I have checked so far:
-Antenna settings: Unchanged from the time channels were working
-Patch: Enabled
-Reloaded bin 2.26
-Hard reboot (flipping the switch on and off at the back of the unit)
Some snapshots:
-Antenna settings Echo 3
View image: Echo3.jpg
-Antenna settings Echo 7
View image: Echo7.jpg
-About STB
View image: About STB.jpg
Any help would be greatly appreciated. Thnx