SONICVIEW SV-HD8000 Q Board installed 8psk built in with dish 1000 - ABA DSS

**usa233** · February 17th, 2008

hi can i get all dn hd channel with ds 1000 plus and SONICVIEW SV-HD8000 Q Board installed 8psk built in?thanks for any help

**bigbird69** · February 17th, 2008

Quote:

Originally Posted by usa233

hi can i get all dn hd channel with ds 1000 plus and SONICVIEW SV-HD8000 Q Board installed 8psk built in?thanks for any help

Yes you sure can.

bigbird

**usa233** · February 17th, 2008

thanks for help

**m2master** · February 18th, 2008

Have you got your dish 1000 set up yet?
I purchased the same system exactly for a good chunk of change but I am having trouble finding 110,119,129.I can find the 110 or 119 with one dish each, but I can not find any with the 1000.2 dish.I have used angle calculators but still no luck.
Do you know if there is a certain order you must go in .eg. find the 119 then skew till the other two come in or maybe yI have to bypass the switch and dial each LNB individually.

At this point any input from anyone would be greatly appriceated...

**bigbird69** · February 18th, 2008

Whats your zip code?

bigbird

**m2master** · February 18th, 2008

I am currently living in Canada with the postal coad (N2M 3E3)

**creativegenius** · February 18th, 2008

I usually start with 110 and work from there.

If you have a 5 port LNB mount you can make your life a bit easier:

You'll be leaving 101 (marked empty) un populated. But this will help you a great deal.

These sell for $25.00 ... although look on fleabay you might get one a few $$$ cheaper.

Creative Genius

Quote:

Originally Posted by m2master

Have you got your dish 1000 set up yet?
I purchased the same system exactly for a good chunk of change but I am having trouble finding 110,119,129.I can find the 110 or 119 with one dish each, but I can not find any with the 1000.2 dish.I have used angle calculators but still no luck.
Do you know if there is a certain order you must go in .eg. find the 119 then skew till the other two come in or maybe yI have to bypass the switch and dial each LNB individually.

At this point any input from anyone would be greatly appriceated...

DOMMY1 · February 18th, 2008

with the 1000 peak with 119 first then everthing will come in after thaat. 129 might not show strong signal but scan it . will still show channels

**m2master** · February 18th, 2008

I finally found 119 with signal 70% and quality 99% but I am not finding any signal or quality on 110 or more importantly the129.
I have been told not to adjust the skew or elevation.

auroragranite · February 22nd, 2008

Is there a fix for Bell? what is the latest?
Thanks