ABA DSS - Free to Air Satellite TV Community - View Single Post

**ccelectro** · April 24th, 2009

I have an elliptical dish, 18x24 with 4 dual lnbf . On one receiver I have 110 119, the second I have 110 119 and 129. Both have separate cable to switch, then from the two cheata switches to the lnbf. From the switches to the lnbfs, I have the 1 switch on the left side of the lnbf and the 2 switch on the right side. where my problem is, that when one receiver is on 110, the other can only pick up 110, and the same with 119. the signal is not there when this happens. I don't know how I messed this up, I ran through it about 25 times.

April 24th, 2009	#1 (permalink)
ccelectro VIP Access Member Join Date: Jan 2009 Location: The Middle Of It All Posts: 775 Credits: 1,036.30 Thanks: 3,624 Thanked 1,646 Times in 438 Posts	problem with two recievers. I have an elliptical dish, 18x24 with 4 dual lnbf . On one receiver I have 110 119, the second I have 110 119 and 129. Both have separate cable to switch, then from the two cheata switches to the lnbf. From the switches to the lnbfs, I have the 1 switch on the left side of the lnbf and the 2 switch on the right side. where my problem is, that when one receiver is on 110, the other can only pick up 110, and the same with 119. the signal is not there when this happens. I don't know how I messed this up, I ran through it about 25 times.