Quote:
Originally Posted by tnp12
try these steps:
how to load a bin file
1. download newest bin file from proper area.
2. MAKE SURE you unzip the file (I use winrar). unzip to desktop.
3. open loader 1 or 2 program, whichever one you have.
4. click open files and select desktop.
5. double click file or drag file to loader program. 6. click "open". file appears in box. select it and click open one more time.
7.file is now ready to load onto stb. IMPORTANT- turn switch on back of receiver off
now if you havent done it already.
8. connect your usb- serial cable to the pc and stb now.
if you have a usb stick you dont use the cable
9. click the pc-stb button.
10. turn on the stb with the switch on back now.
11. wait for the file to load and the word "end" to dissapear and the channel # to
return. turn off again with switch on back before you disconnect the usb-serial cable.
12. file is now loaded, reconnect to tv and turn on again only after all connections are done.
13. wait for new file to autoroll and commence testing enjoyment!!
|
Thanks
i have done this a lot of times for the pass years but this is the first time y Viewsat is acting up.
I wonder if it is fried.
the one in the bedroom is working fine (downloadin to it) but this one dont.
another thing is i am stuck in auto roll does any boddy is hveing the same problem?
Thanks