[tnp12]

this is what you do:

how to autoscan:

1) press menu- go to installation- then autoscan.
2) select the sats you want to scan from the list.
3)press the OK button to start the scan.

as each tp scans you should see the # of channels going up.

if you still have problems try this stuff:

signal and quality issues


if you are having problems with signal or quality try these steps:

* do a hard reboot with the switch on back.
* make sure you have the right sat selected in your antenna settings.
* check your antenna settings to be sure they are correct.
* check all your connections including the switch to be sure they are tight and working.
* if your quality is low or 0 you may need to align your dish.
* make sure you have the latest bin file.
* try different lnb types to be sure you have the right one.
* before moving, changing, or disconnecting any cables turn your stb off with the
switch on back.

post back if you need more instruction.