ABA DSS - Free to Air Satellite TV Community - View Single Post

panelman · January 1st, 2007

for totally dead pansat 3500 i hooked up the jtag cable turn unit on than open wall.exe program refresh then minimize it. then open skymax program check 2mg file then select port then start wait for it to connect to unit then erase wait, then write select the correct file 2mb when done exit then turn 3500 off and on should be good to go turn 3500 off and flash with b80 upgrade boot software click pc to stb then turn 3500 on and it will flash then restart and 305 bin

hope this helps enjoy tv
i posted the software in the download section
http://www.abadss.com/forum/pansat-3...at-3500-a.html

January 1st, 2007	#1 (permalink)
panelman FTA Newbie Join Date: Nov 2005 Posts: 22 Thanks: 1 Thanked 10 Times in 5 Posts Rep Power: 0	totaly dead panasat 3500 for totally dead pansat 3500 i hooked up the jtag cable turn unit on than open wall.exe program refresh then minimize it. then open skymax program check 2mg file then select port then start wait for it to connect to unit then erase wait, then write select the correct file 2mb when done exit then turn 3500 off and on should be good to go turn 3500 off and flash with b80 upgrade boot software click pc to stb then turn 3500 on and it will flash then restart and 305 bin hope this helps enjoy tv i posted the software in the download section http://www.abadss.com/forum/pansat-3...at-3500-a.html Last edited by carpenter1; January 1st, 2007 at 11:22 AM.