ABA DSS - Free to Air Satellite TV Community - View Single Post

asick · May 29th, 2009

I have a DN 500 Plus dish with three LNB's for 110 (DP single lNB), 119 (FSS/DBS dual band for 19 and 118.7) and 129 (DP dual LNB). all three LNB are connected by three wires up to a DPP44 switch and then connected to one SV 360 elite receiver. There is also a power adapter included to power the DPP44 switch.
I scanned all the birds and get the list of all the available channels.

My issue is after when I switch between channels, if one channel will have no signal then after that what ever channel I go to has no signal. If I hard reset the SV a couple of times, the signal comes back till I change channel to another one without signal and all channels go out again. I tried everything, I believe my dish is pointed right as after a power reset signal comes back very strong, also my EPG doesnt populate completely, there are only a few channels which has a day or 2 of EPG, most of them have none, including PPV's. I used the TP settings from the step by step guide from the sticky for SV360 E.

1. Is there a reason I keep hitting no signal, I am tired of reseting the power everytime a channel has no signal. this is totally random.
2. EPG doesnt populate
3. Also, not all the channels show up during scan

Please help with any info you have, I can't sleep good till I figure out the reason.....please help!!!!

May 29th, 2009	#1 (permalink)
asick FTA Novice Join Date: Feb 2009 Posts: 62 Credits: 725.00 Thanks: 15 Thanked 4 Times in 3 Posts	OK, need serious help.... please I have a DN 500 Plus dish with three LNB's for 110 (DP single lNB), 119 (FSS/DBS dual band for 19 and 118.7) and 129 (DP dual LNB). all three LNB are connected by three wires up to a DPP44 switch and then connected to one SV 360 elite receiver. There is also a power adapter included to power the DPP44 switch. I scanned all the birds and get the list of all the available channels. My issue is after when I switch between channels, if one channel will have no signal then after that what ever channel I go to has no signal. If I hard reset the SV a couple of times, the signal comes back till I change channel to another one without signal and all channels go out again. I tried everything, I believe my dish is pointed right as after a power reset signal comes back very strong, also my EPG doesnt populate completely, there are only a few channels which has a day or 2 of EPG, most of them have none, including PPV's. I used the TP settings from the step by step guide from the sticky for SV360 E. 1. Is there a reason I keep hitting no signal, I am tired of reseting the power everytime a channel has no signal. this is totally random. 2. EPG doesnt populate 3. Also, not all the channels show up during scan Please help with any info you have, I can't sleep good till I figure out the reason.....please help!!!!