[ni_bbs]

Originally Posted by greenhornsat

I have a dish 1000.2

satellite 119
lnb power on
lbn type ocs-dp
lbn freq 11250
22khz off
tp freq. 12224
diseqc 1.0 port 1
motor off
legacy sw none

s 67 q 91

110
all the same except port 2
s 67 q 0 (now if a put p1 then q goes to 91)
DO not put on P1, leave it P2... most likely your TP is not getting any sign (normal)

129
all the same except
lnb freq. 11000
and port 3
Your lnb freq. 11000 should be 11750

s 67 q 0 (same deal with port 1 it jumps to q 87 when I do that)

Do I have to separate the ports?

save these settings
I have done it both ways and not had luck.

turn off (standby mode)
then turn off FTA from back or unplug the power for 30 secs.

Turn back on, DELETE ALL SCANNED CHANNELS
Rescan channels One sat at a time.

Good Luck!