ABA DSS - Free to Air Satellite TV Community - View Single Post - Need Help on signal and quality strength!!

**VGiddy** · May 31st, 2009

Signal indicates that the LNB is communicating with your receiver. Quality represents the strength of your communication with the satellite.

So if your S = 96%, then the LNB is good and communicating with the receiver, and S= 0% meanns that you have not hit the satellite. So you need to get the correct co-ordinates for your area and adjust the dish to those figures.

Please note that the markings on the dish are not accurate and will be either a little more or less than indicated on the dish.

May 31st, 2009	#3 (permalink)
VGiddy Veteran Abadss Member Join Date: Nov 2007 Posts: 1,777 Credits: 1,729.60 Thanks: 144 Thanked 1,163 Times in 674 Posts	Re: Need Help on signal and quality strength!! Signal indicates that the LNB is communicating with your receiver. Quality represents the strength of your communication with the satellite. So if your S = 96%, then the LNB is good and communicating with the receiver, and S= 0% meanns that you have not hit the satellite. So you need to get the correct co-ordinates for your area and adjust the dish to those figures. Please note that the markings on the dish are not accurate and will be either a little more or less than indicated on the dish.