ABA DSS - Free to Air Satellite TV Community - View Single Post

Triac-1 · June 9th, 2009

If your subbed receiver works perfect just connect your legacy STB with a second cable to the second port on the 1000.2 LNB array built into this unit there is a DiSEqC switch.
If you wish to in the future add a third cable you may connect it to the third port on the 1000.2 LNB array for a third receiver.
AS I pointed out earlier I had to add a DP power inserter for my legacy STB's.
These inserters have a carrier of >= 20Vdc to the cable feeding the LNB array.

This is the method what worked for me I have a long cable run to my STB. Other cable options or hookups are available using combinations of 22k tone switching and or dividers.

June 9th, 2009	#11 (permalink)
Triac-1 Knows FTA Join Date: May 2008 Posts: 303 Credits: 61.55 Thanks: 152 Thanked 100 Times in 69 Posts	Re: Charly Sub HD and Viewsat If your subbed receiver works perfect just connect your legacy STB with a second cable to the second port on the 1000.2 LNB array built into this unit there is a DiSEqC switch. If you wish to in the future add a third cable you may connect it to the third port on the 1000.2 LNB array for a third receiver. AS I pointed out earlier I had to add a DP power inserter for my legacy STB's. These inserters have a carrier of >= 20Vdc to the cable feeding the LNB array. This is the method what worked for me I have a long cable run to my STB. Other cable options or hookups are available using combinations of 22k tone switching and or dividers.