ABA DSS - Free to Air Satellite TV Community - View Single Post

**VGiddy** · June 12th, 2009

drller1854 - You will need a DP44 and a DP34 to do what has been suggested.

Since you need 3 outputs following that diagram, you will also need 3 - 22KHz switches as well.

Plus two power inserters one for each DP44 and DP34 switches.

That is a very expensive excercise.

Let me see if I could come up with something else.

I have checked all posible connections and is difficult to setup suitable circuits with DPP and DP LNBs.
However if they were all Legacy LNBs then there are immence possibilities.

June 12th, 2009	#6 (permalink)
VGiddy Veteran Abadss Member Join Date: Nov 2007 Posts: 1,771 Credits: 1,677.80 Thanks: 142 Thanked 1,148 Times in 671 Posts	Re: need help combinning switches drller1854 - You will need a DP44 and a DP34 to do what has been suggested. Since you need 3 outputs following that diagram, you will also need 3 - 22KHz switches as well. Plus two power inserters one for each DP44 and DP34 switches. That is a very expensive excercise. Let me see if I could come up with something else. I have checked all posible connections and is difficult to setup suitable circuits with DPP and DP LNBs. However if they were all Legacy LNBs then there are immence possibilities. Last edited by VGiddy; June 12th, 2009 at 09:18 PM..