Quote:
Originally Posted by VGiddy
If you have a DP LNB then it has a built in switch and does not need an additional DiSEqC switch. Take the switch off and go directly to your receiver from the first connection on the LNB. That connection carried both 119 and 110 satellites to your receiver.
In antenna settings choose Echostar 8, 10, 110W and see if it locks on to 110W.
Next change to Echostar 7, 119W. If it shows a Lock on 110W then you have not setup the Dish correctly.
|
Giddy: I have hooked the coax direct into STB. It shows good S/Q on 110 port 1. when I try to lock on to 119, port 2 the quality bounces from 75 to 0 back and forth. If I change ports, ie. Port 3, it then stays w/ high quality but locks in on 110 still. Even if I change the TP freq. to 12239. LNB issue?