ABA DSS - Free to Air Satellite TV Community - View Single Post

boybeenbad · June 18th, 2009

my name is danny ... im new to the site , hope everyone is doing very well and enjoying their fta systems ....

My question is fairly straight forward -- we have two dishes set up , one for the dishnet 110 and 119 , and the second for the bell express 91 . We have untill now only been successful in viewing the dishnet 110 and 119 satellites when conected individually directly to the reciever one at a time ... and for some reason , we cannot watch the 91 ( bell express) at all even when conecting alone and directly to receiver.

We have 2 new diseq c1.2 switches and when we attempt to install 110 in port 4 and 119 in port 1 , and then 91 in port 2 and ofcoarse the reciever ,leaving port 3 empty , we have no success whatsoever on recieving any of the three satellite systems ... all we get is a constant " no lock " after attempting to set all the settings on the "antenna settings area" to what we were told were the propper settings .

Again , we do recieve both 110 and 119 when connecting direct to the reciever just have no luck with usuing the diseq switch --- let me also note that the diseq c1.2 switch is just as its labelled (diseqc1.2) and the reciever only lists settings available for diseq 1.0 / diseq 1.1 ...only those 2 but i have noticed on the motor settings there happens to be a setting for a diseq c1.2 setting .

ANY help would be much appreciated and i thank you very kindly in advance for any assistance you guys can provide to me , Thanks again , Danny ... have a great day all !!!

June 18th, 2009	#1 (permalink)
boybeenbad FTA Newbie Join Date: Jun 2009 Posts: 6 Credits: 17.35 Thanks: 0 Thanked 0 Times in 0 Posts	hello everyone .... my name is danny ... im new to the site , hope everyone is doing very well and enjoying their fta systems .... My question is fairly straight forward -- we have two dishes set up , one for the dishnet 110 and 119 , and the second for the bell express 91 . We have untill now only been successful in viewing the dishnet 110 and 119 satellites when conected individually directly to the reciever one at a time ... and for some reason , we cannot watch the 91 ( bell express) at all even when conecting alone and directly to receiver. We have 2 new diseq c1.2 switches and when we attempt to install 110 in port 4 and 119 in port 1 , and then 91 in port 2 and ofcoarse the reciever ,leaving port 3 empty , we have no success whatsoever on recieving any of the three satellite systems ... all we get is a constant " no lock " after attempting to set all the settings on the "antenna settings area" to what we were told were the propper settings . Again , we do recieve both 110 and 119 when connecting direct to the reciever just have no luck with usuing the diseq switch --- let me also note that the diseq c1.2 switch is just as its labelled (diseqc1.2) and the reciever only lists settings available for diseq 1.0 / diseq 1.1 ...only those 2 but i have noticed on the motor settings there happens to be a setting for a diseq c1.2 setting . ANY help would be much appreciated and i thank you very kindly in advance for any assistance you guys can provide to me , Thanks again , Danny ... have a great day all !!!