ABA DSS - Free to Air Satellite TV Community - View Single Post - Motor, no signal question and/or Help Please

**VGiddy** · June 23rd, 2009

The reason the lights dont com ON is because your receiver has lost control of the motor. Once you reset the Motor to its centre position mark on the motor by moving the motor with the buttons on the motor, and then in the USALS page you set up the Longitude and Lattitude and tell the motor to move to position it will start moving.
The LNB is not fried nor the motor. The LNB does not trigger the motor. However you need to have the cable connected properly to the motor and to the LNB etc. If you know what I mean.

June 23rd, 2009	#4 (permalink)
VGiddy Veteran Abadss Member Join Date: Nov 2007 Posts: 1,771 Credits: 1,678.35 Thanks: 142 Thanked 1,148 Times in 671 Posts	Re: Motor, no signal question and/or Help Please The reason the lights dont com ON is because your receiver has lost control of the motor. Once you reset the Motor to its centre position mark on the motor by moving the motor with the buttons on the motor, and then in the USALS page you set up the Longitude and Lattitude and tell the motor to move to position it will start moving. The LNB is not fried nor the motor. The LNB does not trigger the motor. However you need to have the cable connected properly to the motor and to the LNB etc. If you know what I mean.