ABA DSS - Free to Air Satellite TV Community - View Single Post - hello nimiq 2 82 w new info (please read )

**tomcat01** · July 2nd, 2009

ok guys now i have read that alot of you are not getting the channels and or no quality on nimi2 well here is why

if you go to lyngsat since they are changing around the fec and some modulation this is why so go to lyngsat here is the link

Nimiq 4 at 82.0°W - LyngSat

now read from the left to the right you will see the tp eg :
frequency 12253
symbol rate 21500
polarization ver R=VERTICAL AND L=HORIZONTAL
FEC 2/3
pilot off

modulation turbo 8psk

now youhave to go through the list of tp freq start on the left and tou will see the tp freq then move to the right and you will see SR-FEC
SID-VPID that will be your symbol and your fec enter them

now take a look to the right of that if you see 8psk you can change it to turbo 8psk they are changing some of them around so watch and test it out and by doing this you will get all your channels back and have quality again

hopefully this helps you i am doing a new one for the sv 8000 so i will post later but you can do it yourself not hard

good luck

July 2nd, 2009	#1 (permalink)
tomcat01 Super Moderator Join Date: Aug 2006 Location: north pole Posts: 7,634 Credits: 14,456.00 Thanks: 852 Thanked 7,984 Times in 2,772 Posts	hello nimiq 2 82 w new info (please read ) ok guys now i have read that alot of you are not getting the channels and or no quality on nimi2 well here is why if you go to lyngsat since they are changing around the fec and some modulation this is why so go to lyngsat here is the link Nimiq 4 at 82.0°W - LyngSat now read from the left to the right you will see the tp eg : frequency 12253 symbol rate 21500 polarization ver R=VERTICAL AND L=HORIZONTAL FEC 2/3 pilot off modulation turbo 8psk now youhave to go through the list of tp freq start on the left and tou will see the tp freq then move to the right and you will see SR-FEC SID-VPID that will be your symbol and your fec enter them now take a look to the right of that if you see 8psk you can change it to turbo 8psk they are changing some of them around so watch and test it out and by doing this you will get all your channels back and have quality again hopefully this helps you i am doing a new one for the sv 8000 so i will post later but you can do it yourself not hard good luck __________________ *DO NOT PM ME TO E-MAIL FILES I WILL NOT !!* *THANKS* please ask your questions in the forum do not pm me please!!