ABA DSS - Free to Air Satellite TV Community - View Single Post - help with vspro,sg2100,4x1 diseqc,winegard 30", qph031 setup

namder · July 3rd, 2009

trying to setup the above and have a couple dozen ??? . what diseqc setting do i use in my vspro i have 1.0 and 1.1 ? the motor is an digipower sg2100 diseqc 1.2 compatable, vspro manual says it has 1.2 but i don't have a listing for it. had started sat search my center of arc is .6 degrees east of 91W. tune that and 110w 119w then motor went back to 91W and will only move W or E about 1 degree and stops. tried resetting motor, pushng limits off( just in case it was pushed), manual button moves dish the same amount about 1 degree. so motor guru please help, i can send motor back but would rather not if its all me, but broke is broke. thanks in advance

July 3rd, 2009	#1 (permalink)
namder FTA Newbie Join Date: Jul 2009 Posts: 3 Credits: 13.10 Thanks: 10 Thanked 0 Times in 0 Posts	help with vspro,sg2100,4x1 diseqc,winegard 30", qph031 setup trying to setup the above and have a couple dozen ??? . what diseqc setting do i use in my vspro i have 1.0 and 1.1 ? the motor is an digipower sg2100 diseqc 1.2 compatable, vspro manual says it has 1.2 but i don't have a listing for it. had started sat search my center of arc is .6 degrees east of 91W. tune that and 110w 119w then motor went back to 91W and will only move W or E about 1 degree and stops. tried resetting motor, pushng limits off( just in case it was pushed), manual button moves dish the same amount about 1 degree. so motor guru please help, i can send motor back but would rather not if its all me, but broke is broke. thanks in advance