Quote:
Originally Posted by capncrunk
keep your local network on DHCP and allow the router to assign the IP. only reason you need to set a static IP is if you are using Blackrock or another means to hide your IP.
WIZ1 is your Ihub, and it should show you a Mac address in your logs. On the wbr2310 if choosing WIZ1 or any device for any advanced setting or IP setting you have to click " << " to copy the mac address for that device onto the box on the left. if you didn't enter the MAC there, then you didn't make any changes to the rules for that device.
check on your STB that under system settings/user options/
used priority is: IHub
Autoroll is: OFF
|
TNX for the reply. In that Dynamic DHCP Client list I show my computer's username at .101 with it's wireless Mac. The other listing is WIZ1x0sr000000 Host at .102 address and MAC is 00.00.00.00.00.00. If you get a true Mac address, then that tells me the serial number is not correct. I read somewhere, LONG AGO, that IHUB does not have a true Mac address.
I did pick up on your statement that autoroll should be OFF. I double checked the port forwarding and the WIZ1 was there and selecting it gave me the ip I have been using. Still no channels.
Thanks again