People, I'm hoping someone might just have an answer for me. I have the Ihub and SV Elite hooked up to a WBR 2310 Dlink router and a laptop running Vista SP2.
I have followed the Ihub Manual explicitely and according to it's instructions, it should be working. The router port light is blinking about every 18 seconds with a blink in the tan Ihub light. I have the router set to only 2 addresses to keep DHCP from moving them. 192.168.1.100 is hooked to the Ihub and the router reports this as WIZ1x0SR000000 and Mac address of 00.00.00.00. The other port 192.168.1.101 is hooked to the wireless and the router reports Computer name and Mac address.
Portforward reports port 1920 open on wireless .101 and when I unplug the cat5 cable from the Ihub and plug it into the computer's ethernet port. Port forward reports .100 is open also. Oh yes, the Ihub reports it is connected on the STB and the IP config menu is there and looks like Ihub manual examples.
I have a Linksys wireless router coming to try, although I don't see anything wrong with the Dlink. Anybody see anything I have overlooked?
I'm plain out of ideas. Thanks in advance.
Roscoep
