ABA DSS - Free to Air Satellite TV Community - View Single Post

**VGiddy** · July 12th, 2009

What you can do is from the Dedicated 82W dish connect to the ON side of a 22KHz switch, then the line that is supposed to go from the motor to the receiver can be connected to the OFF side of the 22 KHz switch the the cable from the 22KHz to go to the receiver.

Now in your settings for the motor you will continue to have 22KHz switch OFF but for the 82W only use 22KHz switch ON.

The above will solve your problem. Make sure you get a good ECODA 22 KHz switch.

July 12th, 2009	#4 (permalink)
VGiddy Veteran Abadss Member Join Date: Nov 2007 Posts: 1,776 Credits: 1,688.35 Thanks: 142 Thanked 1,149 Times in 672 Posts	Re: 82 dilemma What you can do is from the Dedicated 82W dish connect to the ON side of a 22KHz switch, then the line that is supposed to go from the motor to the receiver can be connected to the OFF side of the 22 KHz switch the the cable from the 22KHz to go to the receiver. Now in your settings for the motor you will continue to have 22KHz switch OFF but for the 82W only use 22KHz switch ON. The above will solve your problem. Make sure you get a good ECODA 22 KHz switch. Last edited by VGiddy; July 12th, 2009 at 03:23 PM..