Thread: Dish 1000.4?
View Single Post
Old July 31st, 2009   #14 (permalink)
bdolphin1
Knows FTA
 
bdolphin1's Avatar
 
Join Date: May 2006
Location: illinois
Posts: 157
Credits: 746.95
Thanks: 13
Thanked 46 Times in 27 Posts
Send a message via ICQ to bdolphin1 Send a message via AIM to bdolphin1 Send a message via MSN to bdolphin1 Send a message via Yahoo to bdolphin1 Send a message via Skype™ to bdolphin1
Re: Dish 1000.4?

Quote:
Originally Posted by Priestmill View Post
Dish 1000.4 is for the Eastern Arc 61.5, 72.7 and 77W locations. The
LNB is an enclosed unit meaning all 3 LNB are set in place. I am unable
to attach a picture to show you the dish or LNB assembly.

But you can understand the separation are not the same as for 110,
119 and 129W locations.

The way they are going to install it, they will align the dish for those
three locations as the dish 1000.4 was designed for. When they set
it up, your MAX HD will work using that dish and LNB as long as your
antenna settings are ok. As was said make them same as you would
for 110 or 129.

Because Eastern Arc are MPEG 4 HD 8PSK the Ultra Lite won't work in
this set up. If you want the D500P hooked up and aimed at 110/119
then that is ok also. You can have both these arrangements using
a switch(s).

Remember that E/Arc are all Nagr3a at this time.

Having said all that and as an example if you want 61.5 on the MAX
or any HD STB, for now, you have to set it up using 129W satinfo. I
would have to check 72.7 and 77 for you and get back.

Hope this helps.
i think this is your pic
bdolphin1 is offline   Reply With Quote