Pansat 9200 HD vs Pansat 9000

[brown3285]

My Pansat 9200 HD should be arriving tomorrow. I need to know if the files found in the 9K section apply to the 9200 as well. I have seen posts saying go to 9200 section, but there is no 9200 section. This is long and drawn out I know but may help to answer questions for those of us that are a little slow!!
The other answer I have been trying to obtain is - - what is the specific model of 8psk required for the 9200. Any and all help will be appreciated.

Brown3285

[arboristman]

you need to load ONLY 9200 files.
the section is not made yet.
BUT its ok,all the 9200 guides and downloads are in pansat general help/downloads for ya buddy.

[jvelas76]

I just installed a 9200 with a DN 1000.2 ..... I seem to put all my settings in, but still no pic. Just installed the new bin as well. Does any one have an actual set up for this receiver. Thanks

[arboristman]

list your antenna settings buddy and i'l show any corrections you need to make.
list all 3 birds.describe how your hooked to the dish.

[jvelas76]

Thanks for the quick reply!... I set up on Echo 7/ku ,Lnb type = Dish Pro
Freq.=11250
22khz = off
DisEqC= off
Legacy SW = none
Positioner = Disable
Tuner type= DVB-S/Qpsk/off
TP 12443 H 20.000
The other problem I have is that my signal shows 76% but can't seem to pick up any quality signal..... it's at 0%. I have the Dish 1000.2 integrated LNBF hooked up on port 1 directly to the 9200 receiver.

Originally Posted by arboristman

list your antenna settings buddy and i'l show any corrections you need to make.
list all 3 birds.describe how your hooked to the dish.

[jvelas76]

I scanned 110, 119, and 129 but still don't seem to have any HD channels. Does the 9200 need the 8psk installed to get the HD's?

[arboristman]

set your diseqc to port 1 for echo 7
port 2 for echo 8.10
port 3 for echo 5
yes.you would need that add on to get the hd on dn

[BlankstareNJ]

Originally Posted by arboristman

set your diseqc to port 1 for echo 7
port 2 for echo 8.10
port 3 for echo 5
yes.you would need that add on to get the hd on dn

Does anyone have a "list" of HD receivers the 8PSK add on module will work with?

Thanks

[arboristman]

Originally Posted by BlankstareNJ

Does anyone have a "list" of HD receivers the 8PSK add on module will work with?

Thanks

sonicview 8000
viewsat 9000
pansat 9200

[BlankstareNJ]

Originally Posted by arboristman

sonicview 8000
viewsat 9000
pansat 9200

Only those 3? no CS either?

Thanks for your quick response too.

[arboristman]

just those three.
nope.no coolsats.