DP34 switch Question..9200HD Pansat

[zeon22]

Hi Guys, I am currently running a Pansat 2700A with SuperDish 121 with a DP34 switch. I am wanting to add BEV Sats to my current setup but really don't know if I'll be able to. The reason for my addition is because I recently purchased a Pansat 9200HD and am wanting to see the HD's from Canada though BEV (82* and 91*). Will the addition screw with my current setting in anyway? What exactly do I need to do in order to set this up, thank you for all your help and greatly appreciate any input.

Also, what settings(azmuith, elevation and skew) do I need to adjust in order to acquire Bev network.

Thank you,

[jpeterson]

Yes there is a way to add Bev.

You will need to use the pass through outputs (these are on the right side of the switch). There should be three outputs on the DP34 switch that carry the individual signals from the three LNBs. Now get a 4X1 disecq switch and run the three outputs from the DP34 and the additional Bev line to the 4 inputs of the disecq switch. Run the output of the disecq to your reciever. Set your disecq port settings in your receiver to match ports on the switch.

To get the elevation and azimuth for setting up your dish for Bev, use your zip code and a sat angle calculator.

I am assuming that you have only one receiver. If you are looking to add the HD receiver in addition to the one you already have, then it gets complicated.

[zeon22]

Originally Posted by jpeterson

I am assuming that you have only one receiver. If you are looking to add the HD receiver in addition to the one you already have, then it gets complicated.

Sorry I guess I should have made myself clearer about the setup,thats my fault. Yeahh, actually I am looking to add an additional receiver to my original setup of DN(119,110,121). Thanks for all your help on this matter. I guess it's not as easy as just adding the RG-6 line(BEV) to the DP34...yeahh I didn't think so either...that would have been too easy....lol.

Regards,

[zeon22]

Help anyone...thank you

[Red_Dono]

The only way you can receive the extra sats is to add another dp34 for the extra receiver unless you are going to remove 2 birds from the rock and replace them with the bev birds

[zeon22]

Thanks, for all your help...