Pansat 250 sm new user - ABA DSS

**JJudd33** · July 17th, 2008

How do I get to view the channels with the dollar signs? Every channel has them. What an I doing wrong???

**storman666** · July 17th, 2008

If you have the latest bin downloaded to your 250 then you will view them all,the latest bin is 606,good luck.You also have to have your dish aligned to the sats you are trying to hit too.

**JJudd33** · July 17th, 2008

Quote:

Originally Posted by JJudd33

How do I get to view the channels with the dollar signs? Every channel has them. What an I doing wrong???

I did download the latest bin and I can see every show on each channel through the guide but it keeps giving me the dollar signs and says scrambled channel. Any thoughts???

**boboisno1** · July 17th, 2008

I'm not sure about this specific make of pansat but other makes need you to press 8282 on your remote and "set default key". Like I say I'm not sure if your make works this way but if you press 8282 and see that option give it a try.

**JJudd33** · July 17th, 2008

I saw that you told a guy before to do the factory reset. where do I find that.. sorry I'm very new....

**JJudd33** · July 18th, 2008

Ok folks, here's the deal. I did finally get to see some channels. Here's my question, under the 119 it defaults to the TP of 12225 and I have seen in the forums to change it to 12239 which gives me a stronger signal but after I save the change it keeps going back to the original 12225. The signal shows at 91 than totally drops off to nothing. I have to keep going back into to antenna set-up and switching the TP and toggling the LNB off and on to get my signal back, which never goes above 91% ??????? One more thing when the stb is turned on it read 8888 than 8882 than epg downloading. I hope that helps somone, help me....

**JJudd33** · July 18th, 2008

Ok folks, here's the deal. I did finally get to see some channels. Here's my question, under the 119 it defaults to the TP of 12225 and I have seen in the forums to change it to 12239 which gives me a stronger signal but after I save the change it keeps going back to the original 12225. The signal shows at 91 than totally drops off to nothing. I have to keep going back into to antenna set-up and switching the TP and toggling the LNB off and on to get my signal back, which never goes above 91% ??????? One more thing when the stb is turned on it read 8888 than 8882 than epg downloading. I hope that helps somone, help me....[/quote]

kentrog7 · August 28th, 2008

i am having the same problems with the channels with the dollar signs! Can someome pls help!