Newbie need help!!!

[irisajsally]

Hi ... I just purchased a pansat 250sm and I'm having trouble getting it running. I have signal on both ECHO7 and ECHO8 both are connected on a Dish Pro but cant see no PPV channels or any others.The only channel is the PPV channel (500) and it is getting me upset due to that Ive been trying to figure this FTA receiver and i still cant sit down and watch a movie.CAN ANYONE PLEASE HELP ME!!!!!!!

[arboristman]

moderation:
gotcha moved over to the correct section buddy.
hope ya found the redirect ok.
.....................
receiver help:
well this just sounds like an improper antenna settings problem here that can fixed up in no time.can you list your current antenna settings for the birds you setup please?
thanks buddy.

[irisajsally]

Thats cool that you put me in the right place....
This is how i got my settings:
ECHO 7 KU......ECHO 8.10
LUB POWER - ON
LNB TYPE - DISH PRO
LNB LOCAL-FREQ - 11250
22K - OFF
DISEQC - 1.0 #1
LEGACY SW - NONE
POSITIONER SETTING - OFF
THANKS FOR YOUR HELP !!!!

[arboristman]

looks good buddy.
just change echo 8.10 diseqc's port to #2
make sure to delete all channels from that bird first.and then sat scan her again.and you should be good to go.
if not not sure,its just in channel edit mode.there you can select what to delete.
you can do that,or just factory default and start all over.whichever way you feel is best/easier.
other than that,your looking like your well on your way.

echo 7 is correct on #1.

[irisajsally]

Thanks for all your help! Hope i can finally sit down and watch a movie with my family.