problem with BEV - not getting all channel

[ser_98]

Ok guys, i've a complex setup here. I have a BEV dish for HD So i receive the signal (91 and 82 i think)

I have a switch sw44 setup like this :



And i don't really know how to setup my cw-800s to get all channel. I currently have around 233 channel.

When i was running with my bev receiver, i had 2 cable connecting in the back of it. So i do iget this working??

Thanks!

[gibahca]

Post your settings for each antenna.
did load the new bin to your CW-800?

[ser_98]

Here the setting i try :

Satelitte Name41 nimiq 1
Transponder : 12239/H/20000/5/6
LNB Freq : 11250
LNB type : normal
22khz: off
disecq number : none
legacy sw :sw21 dish 2

With this settings i catch 189 channel. And when i try legacy sw :sw21 dish 1, i catch 233 channel (they are different than the other i was catching...)

[ser_98]

yes i have the 1.84 bin

[gibahca]

okay the setting to 82?where is it?
Keep legacy none
and try DisEqc port 1 to 91 and port 2 to 82.

[ser_98]

i need to set the 82 also????

how do i set 2 antenna? sorry i'm kinda newbie to this

[ser_98]

do i need to use the captivework little switch and plus both cable? or i use only one?

[gibahca]

When you have all settings correct the Sat name appears at the screen.
Like at 91 settings nimiq1,3 appears in the right corner.
nimiq 2 to 82 settings.

[gibahca]

Nop you dont need the captive switch.

[ser_98]

how do i set 2 antenna??

ok so i only pick one of the 2 cables?

[gibahca]

Satelitte Name nimiq 1
Transponder : 12239
LNB Freq : 11250
LNB type : normal
22khz: off
disecq number : port1
legacy sw ne

Satelitte Name nimiq 2
Transponder : 12224
LNB Freq : 11250
LNB type : normal
22khz: off
disecq number : port2
legacy sw ne

[gibahca]

yep only one cable