Need help vtv4 on coolsat 5000 - ABA DSS

tieumieu · September 21st, 2008

Hi Iam a new in here,I had a coolsat 5000,and try to set up for vtv4,but
I can't get it,so I really need yours help
Live in Des Moines IA
Had 36 in dish
had motor
so help me step in step please

**cisco123** · September 21st, 2008

hello and welcome to aba.you said you had a cs5000 what do you have now?

tieumieu · September 21st, 2008

Here how I set up
97W-IA5
LNB on
SignleLNB
freq 10.750
off
off
off
the level was 97%,but the Q was 1-5% at all
I have 36" dish

**rustyit** · September 22nd, 2008

This is a case of a blind leading a blind

I'm a nooby and actually here looking for help . However ever, your hardward look similar to what I've experiment with recently, I will try to share my positive experience with you. My buddy and I was able to get it going couple days ago with the following parts and settings:

- Dish 36"
- Coolsat 5k (same as yours)
- FTA (linear) dual lnb - make sure this is a linear pol lnb

-lnb setting 10.750 (default setting did not work)
-tp 119660 H (make sure it is set to this when try to aim the dish)

Good luck

ddden · September 22nd, 2008

VTV4 TP-11966 H,not 119660 H.

tieumieu · September 22nd, 2008

Thank You for you guys help,but tp should be
97.0w-IA5
LNB power on
LNB type single
LNB 10.750----is this mean TP????????
22KH Off
Diseqc sitch off
commit off
legacy sw off
If LNB 10.750 not work so I have to change this LNB 10.750 to 11966 ????????

Whai is 11966H what the letter H mean??
Thank You again for all yours hard work

**rustyit** · September 22nd, 2008

Quote:

Originally Posted by tieumieu

LNB type single

must be FTA linear lnb

Quote:

Originally Posted by tieumieu

LNB 10.750----is this mean TP????????

this setting is good, tp has to due with the channels not lnb

Quote:

Originally Posted by tieumieu

If LNB 10.750 not work so I have to change this LNB 10.750 to 11966 ????????

no, don't change this lnb setting. 11966 has nothing to do with LNB

Quote:

Originally Posted by tieumieu

Whai is 11966H what the letter H mean??

This is like a channel range, it contain the vtv 4 channel at frequency 11966. H stand horizontal, the way this wave is sent out.

Don't use your switch until you get this channel is working first.

tieumieu · September 26th, 2008

OK finally i got it work,now I have 3 vietnamese chanels,one agian Thank You for all yours helps,Thank again
TM