Register Now for FREE!
|
|
|
 |
June 25th, 2008
|
#1 (permalink)
|
|
FTA Newbie
Join Date: Mar 2007
Posts: 46
Credits: 460.15
Thanks: 0
Thanked 2 Times in 2 Posts
|
re-dish
i have a dish pro 500 hooked to my trio 119 in port 1 110 in port 2 quality and signal is good seeing 119 w and 110w . but when i scan and try to watch tv no signal in port 1 119 no tv i think it may be my wires.
|
|
|
|
June 25th, 2008
|
#2 (permalink)
|
|
Moderator
Join Date: Aug 2006
Posts: 14,640
Credits: 16,069.17
Thanks: 2,245
Thanked 12,837 Times in 4,838 Posts
|
Re: re-dish
try switching the port settings
|
|
|
|
|
June 25th, 2008
|
#3 (permalink)
|
|
Moderator
Join Date: Jul 2006
Location: Redneck Country
Posts: 12,636
Credits: 8,510.82
Thanks: 1,513
Thanked 9,555 Times in 4,215 Posts
|
Re: re-dish
Diseq switch could be bad. If changing ports doesn't help, replace the diseq...
|
|
|
|
June 25th, 2008
|
#4 (permalink)
|
|
Expert Site Helper
Join Date: Dec 2006
Posts: 2,099
Credits: 1,679.50
Thanks: 265
Thanked 969 Times in 745 Posts
|
Re: re-dish
well he states that he has a DP 500 so the switch is built in. make sure your lnb is set for ocs-dp and you have 22K off.
when you set up for 119 does the receiver say its pointing to 119?
you may have to move your dish also, or skew it.
|
|
|
|
|
June 25th, 2008
|
#5 (permalink)
|
|
Moderator
Join Date: Aug 2006
Posts: 14,640
Credits: 16,069.17
Thanks: 2,245
Thanked 12,837 Times in 4,838 Posts
|
Re: re-dish
Typical DishPro LNB Settings
Have a dual DishPro LNB setup and cant get signal? Try these settings first:
Sat 119
LNB Power: ON
LNB Type: Single
LNB Freq: 11.250
22Khz: Off
DiSEq: 1.0
Commited: 1
Sat 110
LNB Power: ON
LNB Type: Single
LNB Freq: 11.250
22Khz: Off
DiSEq: 1.0
Commited: 2
There will be no signal from the 119 satellite if looking at transponder #1 (default). Don't panic - goto motor settings -->scroll to sat 119 -->scroll down and move to transponder #2.
c/p thanks to Darlok
|
|
|
|
|
June 25th, 2008
|
#6 (permalink)
|
|
Banned
Join Date: Aug 2007
Location: Near the Fucowee Indians
Posts: 7,267
Credits: 2,908.50
Thanks: 1,493
Thanked 3,303 Times in 2,261 Posts
|
Re: re-dish
Give us your settings, could be the problem
|
|
|
|
|
June 25th, 2008
|
#7 (permalink)
|
|
Super Moderator
Join Date: Nov 2005
Location: ABADSS.COM
Posts: 19,631
Credits: 25,130.03
Thanks: 4,732
Thanked 17,695 Times in 6,674 Posts
|
Re: re-dish
Quote:
Originally Posted by bigevil69
Typical DishPro LNB Settings
Have a dual DishPro LNB setup and cant get signal? Try these settings first:
Sat 119
LNB Power: ON
LNB Type: Single
LNB Freq: 11.250
22Khz: Off
DiSEq: 1.0
Commited: 1
Sat 110
LNB Power: ON
LNB Type: Single
LNB Freq: 11.250
22Khz: Off
DiSEq: 1.0
Commited: 2
There will be no signal from the 119 satellite if looking at transponder #1 (default). Don't panic - goto motor settings -->scroll to sat 119 -->scroll down and move to transponder #2.
c/p thanks to Darlok
|
ok,Darloks settings are incorrect here.
they need to be lnb type oscp-dp as hazwiz mentions.
more specifically since i have a cnx.its called DishPro 1 (same thing,just cnx calls it diff name)
to make these changes.
press menu-installations-channel search.
press ok on lnb.and select dishpro 1
make sure this set this way for both birds.
and you will not be using an external diseqc.its built into the lnb.
|
|
|
|
|
The Following User Says Thank You to arboristman For This Useful Post:
|
|
|
Related Content
|
#1.5
|
|
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
- Members: 447,346
- Users Online: 751
- Forum Threads: 103,052
- Forum Posts: 743,080
|
![Beer: [July 16th, 2009] - Private](http://www.abadss.com/forum/images/beer_01.gif)
