Re: Z3R0 C00L's Ultimate CNX Guide & How-To

[SatelliteGuy126]

In the part of the guide, where it says:

L. Select And Highlight The FACTORY File, Press OK, And Select The "BootLoader Upgrade" Option And Press OK Again.

Before you have to do that part, the photo below, that is what happens. Which one should do I click?



Please reply as soon as possible.
Any such answers would be helpful

[arboristman]

oh.nothing if its your first time loading,or you want to start clean.
you don't want to load anything old if your doing this anyway,so just dont save anything.
just hit cancel.
if you spent a long time modifying your channel list and haven't saved it yet.save as channel data.

[SatelliteGuy126]

Originally Posted by arboristman

oh.nothing if its your first time loading,or you want to start clean.
you don't want to load anything old if your doing this anyway,so just dont save anything.
just hit cancel.
if you spent a long time modifying your channel list and haven't saved it yet.save as channel data.

Okay, thank you so much.
This was a big help

And also, I have about 3 of the same files, and a bunch of other files, but only one is the actual factory file.

Should I delete the rest of them, or keep them?
Because I pressed the cancel button like you said, but nothing happened.

*Call me a noob because this is my first time.

[arboristman]

yeah clean it up.ditch everything off there.
go to usb menu and then with just the factory file loaded on the usb stick.press ok.
it looks like you pressed the green button instead.thats for saving.
just select it by pressing ok.then the popup should let you pick as boot.

[SatelliteGuy126]

Originally Posted by arboristman

yeah clean it up.ditch everything off there.
go to usb menu and then with just the factory file loaded on the usb stick.press ok.
it looks like you pressed the green button instead.thats for saving.
just select it by pressing ok.then the popup should let you pick as boot.

Okay, thank you thank you thank you so much!
Stay on just in case I need more help

Your a life saver!

[SatelliteGuy126]

Follow-up on the process.

Picture 1: Channel List



Picture 2: USB Bin




On picture number 2, nothing happens when I press OK. My only option is to press the green one.

Help?

[arboristman]

well a EXX is not a factory file.
then when i got looking i noticed we needed the latest the latest factory file for these stbs,so i tossed it up here:
http://www.abadss.com/forum/817-cona...in-5-13-a.html

but your not trying the old one there either just so you know.
anyway.try that.

[SatelliteGuy126]

Originally Posted by arboristman

well a EXX is not a factory file.
then when i got looking i noticed we needed the latest the latest factory file for these stbs,so i tossed it up here:
http://www.abadss.com/forum/817-cona...in-5-13-a.html

but your not trying the old one there either just so you know.
anyway.try that.

Okay, I'll try that.
Thank you, again

[SatelliteGuy126]

1. After Reboot, Repeat Steps 10 And 11, And Select The Upgrade/BIN/Firmware File (usually v2.?? / v3.??), Press OK, And Select The "S/W Upgrade" Option And Press OK Again.

Does anyone know which version I should use?

[arboristman]

its the latest dated one in the duo/trio downloads.
just check the date on the right hand side.

[SatelliteGuy126]

Originally Posted by arboristman

its the latest dated one in the duo/trio downloads.
just check the date on the right hand side.

The only one I see that's the latest one is in March.
And the loader is only for recovery;