Problem with scanning channels on Trio

[ANFED]

INFO: CNX Trio Brand new SW: MV)@. 42CNX ( Oct 11 ) Loaded DT_FACTORY_5.13.UPB; DTP_2.42.UPB I used 2 single DP LNB on 500 Dish poined to 119/110 W and single DP LNB on 300 dish pointed to 148W
Echo 1/2 148 W
TP Frq - 12224
DISEqC - 1
LNB - Dish Pro1
22 Khz OF
Power ON

Echo 7 119 W
TP Frq - 12224
DISEqC - 3
LNB - Dish Pro1
22 Khz OF
Power ON

Echo 8/10 110 W
TP Frq - 12224
DISEqC - 2
LNB - Dish Pro1
22 Khz OF
Power ON

DISEqC -Brand New, Tested on Viewsat work well
PROBLEM: I cant find ch 205;300;301;302;140;142;144
When i hook my old Ultra, no problem at all.
PLEASE, ANY HELP !?

[bigevil69]

INFO: CNX Trio Brand new SW: MV)@. 42CNX ( Oct 11 ) Loaded DT_FACTORY_5.13.UPB; DTP_2.42.UPB
Echo 1/2 148 W
TP Frq - 12224
LNB - Dish Pro1

Echo 7 119 W
TP Frq - 12224change to 12239
LNB - Dish Pro1changeto2

Echo 8/10 110 W
TP Frq - 12224
LNB - Dish Pro1change to 3
Diseqc -Brand New, Tested on Viewsat work well
PROBLEM: I cant find ch 205;300;301;302;140;142;144
When i hook my old Ultra no problem at all.
PLEASE, ANY HELP !?

[arboristman]

ya,you just forgot your diseqc settings.or whatever your using for a switch anyway.
(didn't check file versions.make sure they are latest,that's all with latest patch as well)

[ANFED]

THX, will try and posted result

[arboristman]

you might not be using dps.you didn't say what your switch/lnbs are.but dish pro1 may not even be correct actually.
this should help.
if you don't figure it out(check your other stb to figure it)
just let us know what your running.


http://www.abadss.com/forum/816-cona...n-set-ups.html

[ANFED]

As I told before im used every sugestion whot i find in forums, stil cand see espn and
205 fox

[ANFED]

Done it with blind scan