conaxsat mini help startup

[3carfan]

i finally got rid of the coolsat doorstops and bought two conaxsat minis. sorry to say I have no idea of how to get them going looking for help what do I feed in factory bin then new bin do I need a loder to get them any help would be apprciated thanks

or help

[Laser2008]

here is the link to a very good step by step guide
http://www.abadss.com/forum/816-cona...guide-how.html

[3carfan]

laser thanks for your help I'll have to try this tomorrow just got called back to work let you know how I make out thanks again

[SoDarkTheCon]

For future reference...
1. factory file
2. 3.36 uno as bootloader
3. 3.36 uno as s/w
4. latest patch

I do the 3.36 bootloader twice, some only do it once, don't matter both will work just fine for you. Make sure you give it time to autoroll.

[DarkShadow]

Originally Posted by SoDarkTheCon

For future reference...
1. factory file
2. 3.36 uno as bootloader
3. 3.36 uno as s/w
4. latest patch

I do the 3.36 bootloader twice, some only do it once, don't matter both will work just fine for you. Make sure you give it time to autoroll.

Thanks, my bad it's been awhile since I tested a CNX

[SoDarkTheCon]

Originally Posted by DarkShadow

Thanks, my bad it's been awhile since I tested a CNX

no problem bro, just wanted to make sure he has it all set to watch a "scrambled" screen. When the next patch comes out 3carfan you have to load that as step 4. Very simple and if you have any further questions feel free to ask.

[arboristman]

also since your on your way out.pick up a couple usb sticks.or just one is ok if your using them in same house.
you will need a usb memory stick to load them.they only cost a few bucks.
then after work you will be ready to load her up.
gas costs so much to make a separate trip.hope this helps ya save a little.plus a little time.