No signal

[blubird]

Hello, I am looking for help with my cnx-mini.
I have a dish 500 with a DPP.
My settings are:

119

diseqc=1
tp-12239
lnb- dish pro 1
22 khz - off
Multi dish -off
search - all channels
lnb power - on

110

diseqc-2
tp-12224
lnb -dish pro 1
22khz-off
multi dish- off
search- all channels
lnb power -on

I receive all channels on 119, but on 110 I receive "no signal" on all channels.

Can someone tell me what I have wrong.
Thanks.

[cdo_care]

First off Welcome to ABAdss.. Looks like the Dish setup is Wrong.. You need to fine tune your Dish... here's the link to help you.. www.dishpointer.com This is to see you elevation-skew and azimuth.

[hazwis]

i agree, your dish is likely pointed incorrectly. it might just be the skew or you may have to move it ever so slightly.

[blubird]

Thank you, for the help, now that I have this information, what do I do with it. My satelite is in concrete so don't think it turned.
Also to be sure it is hooked up right outside, one of the cables from the lnb is connected to the switch at #1 and the other cable is just hangling loose. When I asked my friend about it, he said it was for another receiver if I wanted one.
Thanks for any help

[jayjay1972]

if your using a dpro twin or quad they have a built in switch so no external switch is needed. Just run the cable straight from the lnb to the reciever. If your using dpro duals then you would use a 2x1 or 4x1 swictch.

needs external switch



no switch needed

[blubird]

I am using the dish pro plus, so you are saying I don't need the switch at all and connect cable straight to receiver. Would my settings stay the same? Would this of been the reason I didn't get a signal from 110?
Thanks

[bigevil69]

that is correct
just run 1 cable from lnb straight to the receiver

[blubird]

Okay I will try this in the morning, and see what happens.
Thank you for the replys and your help.
I seem to be getting a little more knowledge on this site.
Its been like this for 3 months, but didn't bother with it cause had plenty of channels, but family coming next week and would like to have all those ppvs on 110.
thanks again.

[bigevil69]

no problem buddy just let us know if you need any more help

[blubird]

I ran my cable straight from lnb to receiver and did a channel scan under diseqc switch search and now have all movie channels. Now that I have conquered the channels, I am moving on to recording, so may be back with more questions.
Thank you for your help and happy Christmas to everyone.

[jayjay1972]

glad you got it going blubird and let us know if you need further assistance