Europe Sat list help please

[satta2008]

Hi everbody

I have been seeking for an answer quite a while now. I have my Nfuision brought to UK now form US and just like to find out is it possible to use it down here and how can I load the right sattilet list such as astra eurobirth etc. I have already connected Technomate and watching European channels with my motorized dish just need to get Nfuision working again.

Do I need a new bin file/loader to over write USA sat settings?
Can my dish should work with this?

What is the best way to please advice. Thanks

[bill of oz]

hhhmmm.....thats a good question.....im not sure nfusion has a satellite list for the atlantic/european birds.....if not you will have to add them yourself manually.....

[creativegenius]

You'll likely want to see if you can find a SAT info file for another product (like the Technomate) as an example, and then see if you can view that data and then use it as the basis of a list you'll make via adding the SAT's and TP data for each one manually.

Creative Genius

[satta2008]

Originally Posted by creativegenius

You'll likely want to see if you can find a SAT info file for another product (like the Technomate) as an example, and then see if you can view that data and then use it as the basis of a list you'll make via adding the SAT's and TP data for each one manually.

Creative Genius

Thanks guys for the your replay . I will give it ago adding manualy. But othere than that is there any compatiablty issues (LNB signal frq accessing from here) thanks

[s2byus]

Most, if not all, european sats need Linear LNBs.

[satta2008]

Hi

Quick update ..! I managed to put some settings to user1 option and with adding TP I was able to get some channels on that position but I am not sure how I can add satellites and automate the motorize dish to navigate . it says NONetid anyway. Really I need a config file with all the East satellites loaded unfortunately them all West pre loaded. Any idea is welcome thanks

[bill of oz]

Originally Posted by satta2008

Hi

Quick update ..! I managed to put some settings to user1 option and with adding TP I was able to get some channels on that position but I am not sure how I can add satellites and automate the motorize dish to navigate . it says NONetid anyway. Really I need a config file with all the East satellites loaded unfortunately them all West pre loaded. Any idea is welcome thanks

you should be able to edit all the information in.....rename that satellite from "user1" to its proper name.....you should also be able to enter in the proper degrees (example : 24E) for the satellite in the motor menu or usals menu so the usals function will work.....

go to wherever it is that you enter in YOUR lat and long.....there should be a spot there to change or enter in the degrees of the satellite that you are trying to configure......

[creativegenius]

With the technomate hooked up, make a spreadsheet, by copying the data off of the screen and entering it into a series of cells that mimic the onscreen display you are seeing on the TV.

Then save this and with the nfusion hooked up to the TV, add each SAT manually using the data collected on your spreadsheet.

There is a channel editor for the nFusion that 'may' be able to help you, but I haven't used it. But it looks like it will greatly simply the task at hand - Grab a copy of it here:

http://www.abadss.com/forum/831-nfus...tml#post623546

Creative Genius

[satta2008]

I havent notice the sat settings but tried to renem couldnt find the way I Guess the name is not that importent if I can get the sat degree settings right will try and see what happens after work.

[satta2008]

HI

Just to update my post, I managed to add few E sats and got the free channels. But it is allot of work and cant use my official irdeto2 card plus don’t get any update for other channels such as nagra3 in astra, hotbirt etc. ( I did add few proxy servers and tried) i think all nfuision servers configured to update Americas West sats which is fair enough but I gave it a try anyway. Also nfuision current firmware don’t have card sharing menu which allows entering relevant server ip, username and password to allow at the moment. Thanks all.

[nonibidoni]

thank you and happy easter