how to set up new VS PRO

[tharapan]

Just bought new VS Pro and try to set it up by loading 070801a in to a usb thumb drive. After booting the box, the file did not load. How to do next ?

[tnp12]

these directions are for the cable method of loading a bin, they are slightly different from your usb method.

how to load a bin file
1. download newest bin file from proper area.
2. MAKE SURE you unzip the file (I use winrar). unzip to desktop.
3. open loader 1 or 2 program, whichever one you have.
4. click open files and select desktop.
5. double click file or drag file to loader program. 6. click "open". file appears in box. select it and click open one more time.
7.file is now ready to load onto stb. IMPORTANT- turn switch on back of receiver off
now if you havent done it already.
8. connect your usb- serial cable to the pc and stb now.
if you have a usb stick you dont use the cable
9. click the pc-stb button.
10. turn on the stb with the switch on back now.
11. wait for the file to load and the word "end" to dissapear and the channel # to
return. turn off again with switch on back before you disconnect the usb-serial cable.
12. file is now loaded, reconnect to tv and turn on again only after all connections are done.
13. wait for new file to autoroll and commence testing enjoyment!!

[cdo_care]

Make sure your USB drive was formted to fat32.

[edwinsao]

if you still lost just read the sticky's >>>>>Viewsat Pro Help - ABA DSS - Free to Air Satellite TV Community