VS Pro help

[qjamal]

Hi Gurus,
Finally replaced my coolsat 5K with VS Pro. m not new to fta but new to VS.
I have 110, 119, 118 and 148.
Everything was working great with CS 5K, but now only 148 is working fine but all others sat are on "auto rolling process"

Here is my setup:

For 110, 119 & 118 : I have 33" dish with one linear and one standard lnb
For 148 : I have 18" dish with standard lnb

and my settings are...........

Sat. : 148 (Echostar 1,2)
LNB Freq : 11250 Khz
22 Khz Tone : Off
DiSEqC 1.0 : Port 4
DiSEqC 1.1 : None
Legacy SW : None
Motor Type : Disable
TP freq. : 12224


Sat. : 110 (Echostar 8,10)
LNB Freq : 11250 Khz
22 Khz Tone : Off
DiSEqC 1.0 : Port 2
DiSEqC 1.1 : None
Legacy SW : None
Motor Type : Disable
TP freq. : 12224


Sat. : 119 (Echostar 7)
LNB Freq : 11750 Khz
22 Khz Tone : Off
DiSEqC 1.0 : Port 3
DiSEqC 1.1 : None
Legacy SW : None
Motor Type : Disable
TP freq. : 12224


Sat. : 118.8 (Anik F3)
LNB Freq : 11750 Khz
22 Khz Tone : Off
DiSEqC 1.0 : Port 3
DiSEqC 1.1 : None
Legacy SW : None
Motor Type : Disable
TP freq. : 11715


Any help would be highly appreciated.

Thanks in Advance.

[qjamal]

Originally Posted by qjamal

Hi Gurus,
Finally replaced my coolsat 5K with VS Pro. m not new to fta but new to VS.
I have 110, 119, 118 and 148.
Everything was working great with CS 5K, but now only 148 is working fine but all others sat are on "auto rolling process"

Here is my setup:

For 110, 119 & 118 : I have 33" dish with one linear and one standard lnb
For 148 : I have 18" dish with standard lnb

and my settings are...........

Sat. : 148 (Echostar 1,2)
LNB Freq : 11250 Khz
22 Khz Tone : Off
DiSEqC 1.0 : Port 4
DiSEqC 1.1 : None
Legacy SW : None
Motor Type : Disable
TP freq. : 12224


Sat. : 110 (Echostar 8,10)
LNB Freq : 11250 Khz
22 Khz Tone : Off
DiSEqC 1.0 : Port 2
DiSEqC 1.1 : None
Legacy SW : None
Motor Type : Disable
TP freq. : 12224


Sat. : 119 (Echostar 7)
LNB Freq : 11750 Khz
22 Khz Tone : Off
DiSEqC 1.0 : Port 3
DiSEqC 1.1 : None
Legacy SW : None
Motor Type : Disable
TP freq. : 12224


Sat. : 118.8 (Anik F3)
LNB Freq : 11750 Khz
22 Khz Tone : Off
DiSEqC 1.0 : Port 3
DiSEqC 1.1 : None
Legacy SW : None
Motor Type : Disable
TP freq. : 11715


Any help would be highly appreciated.

Thanks in Advance.

Some correction please. LNB Freq. for 119 and 118 is 10750 not 11750. and one of ther lnb is linear and circular not just linear.

Thanks in advance for your help and time

[boboisno1]

11250 lnb freq for 119. Check to make sure ar is turned on.

[bigevil69]

yea 119/110 freq is 11250
118 freq is 10750
not sure about 148 but probaly 11250

[boboisno1]

Yep 148 is 11250

[qjamal]

Originally Posted by boboisno1

Yep 148 is 11250

Thanks Guys for your help.

Got more than 250 channels on 119 with (11750 Khz), lost S$Q when tried 11250 (Is it because I use 33" dish?).

Also got around 140 channels on 118 but all SIDs (Channel #s) are > 4000 and when try to tune any of them just get "Autoroll in Progeress" I left it alone for autoroll for whole night but still auto rolling.
Any idea what m I doing wrong.

Thanks in Advance

[qjamal]

I just want to know if my antena setting is correct and do I need to set anything else like network, auto tp etc .
Can any expert help me to get rid of it?

Thanks in Advance

[gibahca]

Working on my vspro here.
Settings put
auto roll - all on
autoTP - off
the rest is up to you like local channels,full names for the channels.

[bigevil69]

auto tp should be on so if dn or bev changes channels on tps it will update and should not have to rescan

[gibahca]

yep.but i like to rescan it.
so if you dont like it keep it on.

[bigevil69]

i rescan once a month anyway for any new channels they might add but its good if they take a wild hair to move a good channel like they did with hbo about a month or two ago