Antenna Issues

[decows]

I'm sure the answer to my question is already posted....so if someone could direct me, I would SOOOO appreciate it!

Last night we did a factory reset before we loaded the new bin because we had 4 of each channel on our EPG. Now, I'm having issue getting the correct antenna issues with 119W. I can change the TP to show 99% quality, but it doesn't save....I'm so confused....any help would be appreciated

Katie

[tnp12]

antenna settings
press menu- installation- pin code- antenna setup
sattelite echostar 7 (for example)
lnb power - on
lnb type - universal (depends on dish type, try all selections to be sure you have the right one)
lnb high - 11250
lnb low - 9750
tp freq - 12224
diseqc 1.0 - port (depends on where the cables are on the switch. use none if you only have one dish and lnb) suggested setting, echostar 7(119) port 1, echostar 8,10(110) port 2, nimic 1(91) port 3.
motor - off
legacy sw - none

some tp's have higher quality than others, dont worry about that, as long as the one you see when you press info on your remote is 70 or above you are alright.

[tnp12]

hello, welcome to abadss, the best fta site on the net!!
this is much more than just a place to get files. it is a community with dedicated members,
forums for just about anything, social groups, your own profile page, access to a weekly poker game,
and too much more to list.
make ABADSS your first stop for everything fta and you will be rewarded with much more.
reading is the best way to learn, use the search option to find posts related to your specific problem.
if you still need help post a question in the proper forum.
helpful hints:
* read and understand the site rules to guide you through our many forums.
* hard reboot with the switch on back of your receiver solves many minor issues.
* before you unplug your receiver, or disconnect any connection including the
switch or lnb ALWAYS REMEMBER to turn the receiver off using the switch on back of the receiver.
you could burn up your switch or mess up your settings if you dont.
* post your type of receiver, your antenna settings, and explain your problem well to receive the best help.
* you need to upgrade your membership to access the files section on this site. this can be done by
clicking upgrade membership at the top of the page. it is free to join the site, ask questions and receive help.
you can upgrade at any time.
* hijacking threads is confusing and not wanted here at abadss. see the site rules to understand
better about hijacking threads. to avoid this start your own thread in the proper forum
if you have any questions.
* this is an informative and friendly site devoted to the fta hobby. the members
and moderators will be glad to help in any way they can.
enjoy the forums and come back often!