Quality is at Zero

[ymuas82]

i am using a dish 500 with a TERK LNB(the part number is TLNB-10 from radioshack).

the specs for the lnb are as follows
Input Freq........ 12.1~12.7GHz
Output Freq...... 950~1450MHz
Noise Figure...... 1.1dBMAX
L.O.................. 11.25GHz
Gain................. 50~62dB
RHCP & LHCP(no idea what that means)

Originally Posted by ymuas82

here are the current dish settings. i currently have it pointed at 110, since that's the only direction that i've been able to gain a higher LEVEL(currently at 84~86%).

my location is 93726, Central California

skew........ -1
elevation.. 46~47
Az........... 157~158

[gameplaner]

If you are in 93726 area,

I would say try Elevation 46, az: 149 to 164, Dish Skew: 90

Sometime, your actual elevation is different then what data says.

Fix, Skew and play around with Elevation and AZ, make sure you dont stand in front of dish or it does not have any object.

[d_mon1]

I need some info.... Off topic, sorry.
I'm getting a CS 6100, what size USB Stick should I purchase to load the bins?

[dhatleysr]

the last download for the 6100 was 1.15mb

[d_mon1]

Originally Posted by dhatleysr

the last download for the 6100 was 1.15mb

You think 1 gig is way too much?

[dhatleysr]

unless you want to use it for anything else,like pictures or what ever

[d_mon1]

So maybe 256MB should be fine right? I'm only using it for the bins.....

[gameplaner]

d_mon1-
Yes, it is good size for bin use only. U can get 1GB free from buy dot com and use google check out.

[d_mon1]

Originally Posted by gameplaner

d_mon1-
Yes, it is good size for bin use only. U can get 1GB free from buy dot com and use google check out.

SWEET! Thanks man.

[borear]

on sat 61.5 go to manuel scan and change transponer to 4 -12 and you should get signal sometimes your quality has a lot to do with your connection try using new cable and dont use screw on connector they give you problems with corrosion down then road