[diron9908]

i am useing the nfusion web loader v1.31 to load the new bin and every time i am getting not responding i used it on vista and xp and still the same thing now i want to know what am i doing wrong did i miss some thing ? please help ..thanks..

[creativegenius]

If you download the 'nFusion Masterpack' from the nFusion download area here, there is a User's Manual for the loader in there, that will help you get familair with its operation if you are not familiar with how to use it.

Creative Genius

[diron9908]

you know it says autodown mfc application is not responding and i went through all the steps to load the new bin file

[diron9908]

when i put in my ip address the promt screen wont come up at all i am trying everything with no luck

[deanluna]

ok.,.,so are you using the webloader?.,.,.,or using the loader program 1.31?.,.,if you're using the 1.31 loader program there is no place you need to enter your ip addy.,.,just follow the procedure that you'll find in the 'master pack' as CG suggested.,.,if you are using the webloader simply type the ip of your nFusion into the address bar of your web browser.,.,then username-'admin' and password-'0000'..,(four zero's).,.,this will bring up the webloader page for you to upload the bin.

[creativegenius]

If you wish to use the webloader ... you'll want to take the zero's (0's) out of the IP address used by your Phoenix unit.

So if your IP# is: 192.168.10.105 you would enter 192.168.1.15 into the web loader.

Hope that helps ya

Creative Genius

[diron9908]

ok so i can get all the info i need in the nf masterpack then right thanks for the help peace...

[packrat]

Originally Posted by diron9908

ok so i can get all the info i need in the nf masterpack then right thanks for the help peace...

Yessir. I got my new Phenix yesterday, and installed first the factory, then the newest S/W using the masterpac. I then installed 119,110,and 91, scanned chennels, and whammo!! I got so many channels my right pointer finger is sore. I would like to sing praises of Phoenix , and you lovely people. should I start a new thread? where?

[deanluna]

Originally Posted by creativegenius

If you wish to use the webloader ... you'll want to take the zero's (0's) out of the IP address used by your Phoenix unit.

So if your IP# is: 192.168.10.105 you would enter 192.168.1.15 into the web loader.

Hope that helps ya

Creative Genius

thats true on some networks and not on others.,.,I leave in all the zero's here for it to work.