New Nfusion Hd Which Is The Correct Bin - ABA DSS

GTOMAN · 4 Weeks Ago

Hey guys i just got my new nfusion hd box which is the correct bin file to load?? is it the v1.3sr25?? I see talk of a 53 bin file where would this file be? i would like to load the correct bin file. Thank You

**cdo_care** · 4 Weeks Ago

Just load the v1.3sR 25(Maintenance release).

Welcome to ABAdss. Nice to have you.

**creativegenius** · 4 Weeks Ago

In addition to the file cdo-care discussed above, this will help you:

http://www.abadss.com/forum/1005-nfu...ick-guide.html

Creative Genius

**rodster562** · 4 Weeks Ago

alot of people have problems with the 25 file and went back to use the 24 I know I did all kinds of freezing so am using the 24 file and running very smooth in case that happens to you

tony864 · 4 Weeks Ago

Quote:

Originally Posted by rodster562

alot of people have problems with the 25 file and went back to use the 24 I know I did all kinds of freezing so am using the 24 file and running very smooth in case that happens to you

i'm using
25 and it has not freezing for 3 days now!!

**snakebite** · 4 Weeks Ago

i have been using 25 f bin since it came out with no problems also.

**johnnybluedawg** · 4 Weeks Ago

yes,,stick with 25 ,, its working great

**spider53** · 4 Weeks Ago

25 working great for me

dbilauca · 3 Weeks Ago

Hi all, i just received my nFusion HD box yesterday. I've got the jumpber set properly. I have signal on 110, 119 and 129. I have scanned and received several hundred channels. I am unable to view the ones with a dollar($) sign next to them. I have the 25 maintenance bin loaded via USB. Any thoughts on what I could try? Also note that I have a static IP on the Network setup. I can ping it and can use the Web Admin. When I attempt to update the software, it gets to about 5% and says FAIL. I'm not sure that it's related to the $ issue. Any advice would be greatly appreciated. Thank you for your time.

**snakebite** · 3 Weeks Ago

what is the message on screen? it should read i-on-n-on-p-off-emul-off.you have internet connection and ip address? you should have it on DHCP.it is failing s/w update because there is no updates available.

dbilauca · 3 Weeks Ago

Quote:

Originally Posted by snakebite

what is the message on screen? it should read i-on-n-on-p-off-emul-off.you have internet connection and ip address? you should have it on DHCP.it is failing s/w update because there is no updates available.

Yes, the message is i-on-n-on-p-off-emul-off. Thank you, I wasn't sure if that was the cause of the failure on the software update. Would you have any ideas as to why I am unable to view the $ channels?

**snakebite** · 3 Weeks Ago

what is your s/q readings on each sat? you have the right port selected on each sat and your getting confirmation banner in antenna settings confirming lock on each sat? go into your menu -information -stb information to confirm you have 25f bin loaded.

dbilauca · 3 Weeks Ago

Quote:

Originally Posted by snakebite

what is your s/q readings on each sat? you have the right port selected on each sat and your getting confirmation banner in antenna settings confirming lock on each sat? go into your menu -information -stb information to confirm you have 25f bin loaded.

The Signal and Quality is high on each satellite. 95% and above. I'm actually able to view the HD Theatre channel because it has no $ next to it. (channel 4264 on 129.0 W 12384/H/21500). Oh, I just noticed that I'm able to view the channels on 119. I guess most of $ on the HD aren't working, but it's working on 119 and 110. Sorry for the trouble and thank you very much for your time!!

**snakebite** · 3 Weeks Ago

good to hear my friend now enjoy your tv.

ramrajs · 2 Weeks Ago

Dear Snakebite,
I have a nfusion hd. I installed the 25 bin file successfully. I am not getting any channel with the $ sign. I only get this message i-on-n-on-p-on-emul-on-S.U.N.S. Disconnected.
Please help!

**jose2001** · 2 Weeks Ago

verry true my friend

**snakebite** · 2 Weeks Ago

Quote:

Originally Posted by ramrajs

Dear Snakebite,
I have a nfusion hd. I installed the 25 bin file successfully. I am not getting any channel with the $ sign. I only get this message i-on-n-on-p-on-emul-on-S.U.N.S. Disconnected.
Please help!

you need to shut off proxy -in network settings -and shut emul off in your -user settings.

**creativegenius** · 2 Weeks Ago

Set the P (Proxy) to off.

Creative Genius

Quote:

Originally Posted by ramrajs

Dear Snakebite,
I have a nfusion hd. I installed the 25 bin file successfully. I am not getting any channel with the $ sign. I only get this message i-on-n-on-p-on-emul-on-S.U.N.S. Disconnected.
Please help!

ramrajs · 2 Weeks Ago

Thank so much Snakebite! That worked perfect!
All the channels are listed twice. I am missing a lot of channels. Is there another bin file I should also download?
Do you recommend any additional bin file for me to download besides the 25 Bin?

**creativegenius** · 2 Weeks Ago

The choices you appear to be missing may not be available. Factory reset your unit and do another scan. Once only.

Creative Genius