How to get ippvr_30b to work with XP

[arboristman]

c/p
How to get ippvr_30b to work with XP
-Well first down load the file and unzip it.

-Next install the file.

-Restart PC like directed

-Then run the program making sure that your setting on the Nfusion and the IPVR are the same
Example
Program says Computer IP 198.168.1.103

Nfusion should read
DHCP/static
Ip Address 192.168.001.101------ IP of NFusion
Subnet mask 255.255.255.000
Gateway 192.168.001.001------ Routers Gateway
PVR Server IP Address 192.168.001.103---- Computers IP


Now if this is all set right and there is no firewall settings blocking the communication when you hit record you should start recording
If something isn't right you will get unable to connect

Now to where I had problems.
While recording and after recording I would only get a grey screen on my pc if you have this problem here is how to correct it.

go into C:\Program Files\Common Files\BitCtrl and delete bcVideoDecoder.ax

And there you go this should solve your problems.