Web Loader Problem

[arichert3]

also make sure unit is on channel 100 i here it makes it easier

[allen1977]

ok i tried to unzip the file again and my winrar message comes up with an error...maybe i have a screwed up file?

[tenzin]

Originally Posted by arichert3

make sure you use the periods after every three numbers

Yes i did that.

[allen1977]

ok i believe i had a corrupt file i redownloaded the file and reloaded box and it went perfectly

[arichert3]

make sure stb network connection is set to on and try again

[tenzin]

Originally Posted by arichert3

also make sure unit is on channel 100 i here it makes it easier

i dun have ch 100

[allen1977]

that was my problem, a corrupted file or partially downloaded file im not sure but im up and running full blast....thanks to all who had suggestions and input.

[kapitan]

Originally Posted by allen1977

i noticed when i looked at my files in the zipped format it says theres 808kb file, when i unzip it it shows up as okb in the bin file...what does that mean?

Unzipped the bin file should be around 886 kb. You can better download a new bin file and start all over again. To use the webloader here is a good sticky to read: http://www.abadss.com/forum/830-nfus...n-network.html In the beginning I had also problem with opening the webloader, but after I disconnected from the internet and disabled my antivirus and firewall I had no problem at all.

[Crow13]

Guys the Webloader is working fine, make sure when you type in the I.P address you type it at the top line on Internet Explorer that starts with http:

[RagingBull]

Also it may sound stupid but I have helped some people who have removed their internet cable from the box during last week when they were on cardless and forgot to put it back on. It will still show an IP address as long as the box has not been powered off from the back switch so make sure your cable has been put back on.

One of the boxes I loaded would get to the login screen but would fail during the download. Ended up being a courrupted bin even though I got it from here. Downloading from here again solved the prroblem. Make sure also that you remember to unzip or unrar the file before loading to the box. If you get the NENU message on the box display this is most often caused by trying to load the zipped file.

[Crow13]

Well Internet Explorer seems to be getting overloaded by too many people trying to use it , but certain times in the day it is wide open. I tried just to see if the method I have mentioned on how to use the Webloader works and it does, you just have to catch the Internet Explorer at a certain time of the day (7pm Est.) That was when I got it to work no problem, so just try periodically through out the day. Also if you think you changed the Username and it is not (admin) than think about what it could have been changed to, also make sure you didn't change the Password on the N-Fusion from (0000). Anyway all these have to be exact same as your I.P of your N-Fusion, good luck.

[matrix01]

I was having a problem using the ip adress that was showing on my receiver, so I typed in my Ip adress for my pc & it brought up all components on my network . I noticed that the IP adress showing on my receiver was a bit different . So I typed in what I saw on my pc and it worked. what I am saying is , that as per instructions I saw on this site , I was typing in the IP adress as it appeared with no luck. Maybe this will help. The webloader is excellent , once you can get access to it.

[chill dawg]

matrix:

networks can be very complicated. DHCP assignment can change with reboot of computer or node (stb in this case) attached to a network as they are not static ip addresses. Most isp providers will even change your address upon reboot of computer. That's why when something of this nature happen trouble shooting starts with the simple things like checking to make sure what ip addresses are assigned by your router via web browser page for your router. Glad to see you hung in there to find solution, and up and running.